Vnish Official Firmware for ASIC Antminer
👇 Select the firmware 👇
NAND
ATTENTION:
It is necessary to check the date of the stock firmware.
Using the toolkit, you can install Vnish on the following versions of the standard firmware: from February 2024 and earlier, from December 2024 to August 2025.
From September 2025 and later, it is not possible to install the firmware.
If the toolkit notifies you that you need to roll back the firmware to an earlier version using a flash drive, you need to use the stock recovery sd image for your model and control board type by downloading 2024 UNLOCK.
The Amlogic control board with firmware from September 2025 or later cannot be flashed using the sd image. You need to unlock the usb port according to the instructions or replace the control board!
It is necessary to check the date of the stock firmware.
Using the toolkit, you can install Vnish on the following versions of the standard firmware: from February 2024 and earlier, from December 2024 to August 2025.
From September 2025 and later, it is not possible to install the firmware.
If the toolkit notifies you that you need to roll back the firmware to an earlier version using a flash drive, you need to use the stock recovery sd image for your model and control board type by downloading 2024 UNLOCK.
The Amlogic control board with firmware from September 2025 or later cannot be flashed using the sd image. You need to unlock the usb port according to the instructions or replace the control board!
Installing and updating the firmware
The utility will automatically detect the required firmware during the installation or update process.
You can also download TOOLKIT Lite and the corresponding nand file separately, selecting the firmware based on your model and control board type.
If you don't know the exact miner model and control board type, then download the Toolkit FULL Pack -
It includes files for all models and a complete instruction for installing the VNISH firmware.